12 m (40 ft.) by 90 degree flexible detection pattern adjustable to 5 ranges
SMDA logic for advanced temperature compensation and environmental noise immunity
Easy masking for over spill prevention
Double conductive shielding against bright light disturbance
Conduit/TX-battery case for both wired and wireless-ready models

862-01-VXI-ST

Optex VXI-ST Outdoor Detection PIR XWave2

Name: Optex VXI-ST Outdoor Detection PIR XWave2
SKU: AC1128*

SKU: AC1128*

ZAR 2,450.00

Quantity

Model	VXI-ST	VXI-AM	VXI-DAM
Detection method	Passive infrared	Passive infrared & Microwave
Coverage	12.0 m (40 ft) wide / 16 zones
PIR distance limit	12 - 2.5 m (5 levels)
Detectable speed	0.3 – 1.5 m/s (1 - 5 ft/s)
Sensitivity	2.0°C (3.6°F) at 0.6 m/s (2 ft/s)
Power input	9.5 – 18 VDC
Current draw	20 mA (max) at 12 VDC	24 mA (max) at 12 VDC	35 mA (max) at 12 VDC
Alarm period	2.0 ±1 sec.
Warm-up period	Approx. 60 sec. (LED blinks)
Alarm output	N.C. / N.O. Selectable 28 VDC 0.1 A (max)
Trouble output	-	N.C., 28 VDC 0.2 A max.
Tamper output	N.C., 28 VDC 0.1 A max.
LED indicator	Red: Warm-up, alarm,masking detection (VXI-AM only)	Red: Warm-up, alarm,masking detection. Yellow: Warm-up, MW detect.
RF interference	No alarm 10 V/m
Operating temperature	-30 – +60°C (-22 – +140°F)	-20 – +45°C (-4 – +113°F)
Environment humidity	95% max.
IP rating	IP55
Mounting	Wall, Pole (Outdoor, Indoor)
Mounting height	0.8 – 1.2 m (2.64 ft – 3.94 ft)
Weight	500 g (17.7 oz.)	600 g (17.7 oz.)
Accessories	Screw (4×20 mm) ×2 , Wiring sponge ×3 , Masking seal ×3

Model	VXI-R	VXI-RAM	VXI-RDAM
Detection method	Passive infrared	Passive infrared & Microwave
Coverage	12.0 m (40 ft) wide / 16 zones
PIR distance limit	12 - 2.5 m (5 levels)
Detectable speed	0.3 – 1.5 m/s (1 - 5 ft/s)
Sensitivity	2.0°C (3.6°F) at 0.6 m/s (2 ft/s)
Power input	3 – 9 VDC (Lithium or Alkaline Battery)
Current draw	9 μA (standby) / 4 mA (max) at 3 VDC	10 μA (standby) / 4 mA (max) at 3 VDC	18 μA (standby) / 8 mA (max) at 3 VDC
Alarm period	2.0 ±1 sec.
Warm-up period	Approx. 60 sec. (LED blinks)
Alarm output	N.C. / N.O. Selectable-Solid State Switch 10 VDC 0.01 A (max)
Trouble output	N.C. / N.O. Selectable-Solid State Switch 10 VDC 0.01 A (max)
LED indicator	Disable: During normal operation. Enable: During WALK TEST or LED SW on. Red: Warm-up, alarm, masking detection. Yellow: Warm-up, MW detect.
RF interference	No alarm 10 V/m
Operating temperature	-20 – +60°C (-4 – +140°F)	-20 – +45°C (-4 – +113°F)
Environment humidity	95% max.
IP rating	IP55
Mounting	Wall, Pole (Outdoor, Indoor)
Mounting height	0.8 – 1.2 m (2.64 ft – 3.94 ft)
Weight	500 g (17.7 oz.)	600 g (17.7 oz.)
Accessories	Connector for POWER and ALARM, Connector for TROUBLE, Screw (4×20 mm) ×2, Masking seal ×3

Optex VXI-ST Outdoor Detection PIR XWave2

Specs

SAIDSA Accredited