The Videofied RC601 remote keyfob can arm and disarm the Videofied video surveillance system at distances of up to 300 feet. The RC601 has an encrypted "rolling code" system that changes the actual signal sent to the control panel every time it is used. Audio feedback (beeping) is provided for arming/disarming to verify communication with the panel and indicate entry/exit delay.
Four buttons allow the activation or desactivation of several arming profiles (full arming and 2 special arming profiles).The arming is confirmed by a red double flash from the built-in LED. Disarming is confirmed by a green double flash.
A long press on button 1 or button 2 generates a siren or silent (under duress) panic alarm.
The KF keyfob uses S2View® Spread Spectrum, Videofied®, interactive, encrypted wireless circuitry for secure two-way communication with the control panel.
Operating the system with the keyfob can normally be done from within or outside the premises and requires no access code entries.
One press on the button will launch the system full arming.
One press on the button will disarm the system completely.
One press on the button 1 or 2 will arm specifing areas (device groups) according to the special arming configuration.
A long press on button 1 will generate a panic alarm with siren, a long press on button 2 will generate a silent panic alarm (under duress).
The keyfob is powered by one CR3032 3V Lithium battery that will last 5 years. The keypad transmits the battery status with each activation.
top of page
bottom of page